Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   Finally got my 60 into the shop (http://squarebirds.org/vbulletin/showthread.php?t=20291)

HD1960 03-27-2016 12:50 PM

Finally got my 60 into the shop
 
For an engine swap. It is a pain because I wanted to do it myself, however I have neck issues that will require surgery and thus made the ability to turn the wrench difficult to impossible. Stupid spine problems! Anyway, while the motor is out I am replacing the front grill pieces with the kit from Macs. Has anyone here used that kit? Did you like the result? Hoping to have it back and driving mid April. Switching from 352 to 390. Shop had a 53 Ford truck in when I dropped mine which made me feel better about my choice.

Dan Leavens 03-27-2016 08:05 PM

Always good to feel confident about the shop you selected especially with the 53 in there:D

HD1960 03-27-2016 11:05 PM

Yes
 
Quote:

Originally Posted by Dan Leavens (Post 99730)
Always good to feel confident about the shop you selected especially with the 53 in there:D

I went to several. Got turned down by some due to the nature of the vehicle. Did not want to mess it up I guess. Nice to see someone that has clients with a classic car lean.


All times are GMT -4. The time now is 01:54 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.