Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   steering shaft placement 1962 BIRD (http://squarebirds.org/vbulletin/showthread.php?t=19843)

mercury52guy 12-09-2015 10:26 PM

steering shaft placement 1962 BIRD
 
I am working on the turn signal contacts and while at it I wanted to grease the upper bearing & when I pulled the bearing up the shaft come up also. Now when I try to move the shaft down it won't move. HELP GUY

jopizz 12-10-2015 05:07 PM

Did it pull out where the rag joint joins the steering box? You may have to loosen the rag joint and push it back on.

John

mercury52guy 12-12-2015 02:06 PM

1962 bird steering column
 
thank you for the reply. I have checked the rag joint & I don't see any movement at that end. I have tried to move the shift collar thinking that may have moved down on the column but I can't move it. What holds that in place? GUY

jopizz 12-12-2015 02:48 PM

Do you have the swing away steering column?

John


All times are GMT -4. The time now is 09:07 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.