Lifter bleed down tool
Getting ready to put heads and valvetrain back together on 390 in 63 bird. I want to check valve clearance to avoid more pushrod problems and service manual shows a bleed down tool to collapse lifters but i havn't been able to find one online. What are you guys doing to bleed down lifters and check valve clearance. I may resort to fabricating a tool for this purpose but I thought I'd ask on here what some of you have done.
There are a few methods. Some builders use solid lifters in one cylinder to get a sample. Some simply measure using the outside of the lifter body.
If you have 'the touch', you can determine preload on a new, empty lifter by feeling when the lifter plunger hits the circlip, at the top of the lifter. It's important that your preload is somewhere around .025"-.040". So, I shoot for thirty but I never go over forty thousandths. I use NO valve springs when measuring valve-to-piston clearance. Absolutely no math is used; simply rotate the crank slowly while 'testing' the valve up and down. You can use a feeler gauge at the valve tip for a true reading provided you did your preliminary cam and timing chain set assembly first.
I use this information to verify my cam is properly timed. Some cams and factory timing gears come advanced or retarded but they normally don't say. Mechanics simply line up the timing marks, button it up and get paid. I want to know exactly where my cam is timed. - Dave
|All times are GMT -4. The time now is 04:14 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.