Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   61 Tbird newbeie (http://squarebirds.org/vbulletin/showthread.php?t=1941)

61Tbird 08-14-2004 08:32 PM

61 Tbird newbeie
 
I'm happy to have been told about this message board since I'm in the begining stages of restoring a 1961 Tbird convertible. If I can be of any help in your restoration please ask I've accumulated a lot of information and parts over the past six months on the "Curvy Birds" as I've have known the 61 - 63 birds. I look forward to receiving help on my project as "problems" arise.

I have a very clean and rust free 62 coupe donor car. During this fall I'll should be far enough a long to offer OEM gauge rust free floor and trunk pans. As soon as I have the interior of the 62 taken out I should be able to take pictures of the floor and trunk area. The convertible came to me completely apart project car with tons of extra parts.

I'm not a stickler for "original" because I want a cruiser on the outside and a hot rod under the hood. I am dropping in a built 400hp with 460 ft lb of torque 390 latched on to a built C6 able to handle 500hp. Custom headers, Super 40 Flowmasters, 750 Barry Grant Carb and a Mallory Unilite distributor... God, I can't wait.

:)

Alexander 08-15-2004 07:24 PM

RE: 61 Tbird newbeie
 
Welcome to the board! Good luck with your restoration.

Alexander
1959 Hardtop
1960 Golde Top

uncleotis63 09-02-2004 03:59 PM

RE: 61 Tbird newbeie
 
What do you mean you have a donor car? Are you selling it? Are you using the floor pans for the resto on the convertible??

Travlin 09-04-2004 11:49 AM

RE: 61 Tbird newbeie
 
Hey Shawn -- I see ya made it over here. Welcome aboard!

61Tbird 09-05-2004 09:21 AM

RE: 61 Tbird newbeie
 
Yes, the donor car is the coupe. I may need the right front floor pan (minor rust out on the convertibe floor from a bad heater core) but I'm sure I wont need the other floor pans. I'm in the process of stripping the coupe completely. I'm blown away how rust free this car is. So far all the bolts, nuts, and screws actually work. This caar came out of the deep south. I will offer parts off this car because thay are rust free and OEM guage. I expect to be at that point this fall. I can send pictures contact jmciechon@snet.net. The car is located in Connecticut.


All times are GMT -4. The time now is 03:34 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.