Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   430 MEL Engine (http://squarebirds.org/vbulletin/forumdisplay.php?f=32)
-   -   Oil pump drive shaft length (http://squarebirds.org/vbulletin/showthread.php?t=18509)

bpetska 03-02-2015 12:25 PM

Oil pump drive shaft length
 
I am replacing the oil pumpin my 430 and will not be using the vacume pump. Does anyone know the correct length the drive shaft should be?
Also on the exhaust manifolds does the heat shield go against the heads and then the gasket?
Thanks
Bill

Howard Prout 07-19-2015 04:27 PM

I am surprised that nobody has answered your query. I think somebody like Carl Heller (aka partsetal) would have answers to both your questions. My 430 has a functioning vacuum pump so the drive shaft is a different length. My 430 does not have heat shields except for the snorkel to the air cleaner.

bpetska 07-21-2015 04:59 PM

Thanks for replying to my question. My oil pump shaft ended up being 8 15/16" long.
Bill

tbird430 07-29-2015 05:35 PM

My 1960 430cid had a thin sheet metal gasket between the cylinder head & exhaust manifold(s).

-Jon in TX.


All times are GMT -4. The time now is 02:52 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.