Bought a new thermostat to put in my 1962 390 motor and have a quick question. I bought a gasket kit for the motor and installed the gasket that goes on the expansion tank, but I also recieved a gasket for the thermostat when I bought it. When I install the thermostat on the intake manifold does it just sit against the manifold and the gasket on the expansion tank sits against the thermostat? Does the thermostat require a gasket on both sides of the thermostat (one on expansion tank and one on intake manifold) or does the thermostat just sit against manifold and gasket on the expansion tank makes the seal?
The thermostat sits in the recess in the expansion tank and the gasket goes over it. Only one gasket is used.
|All times are GMT -4. The time now is 09:03 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.