I am thinking of replacing the weatherstripping on the doors and vent windows on my 62 Landau coupe. I was wondering how difficult this job is and if anyone tackled it themselves. Any insight would be appreciated. Do I need special tools, etc...
Neither job is all that difficult. You will need some 3M weatherstrip adhesive to do the door seals. You will have to remove the vent glass to install new vent seals. They are just screwed in place. You don't need any special tools. The shop manual has detailed instructions. If you don't have one you can borrow mine since you are close by.
Thanks John for the advice. I am just in the "thinking about it" stage at this point. Thanks also for the manual offer.
|All times are GMT -4. The time now is 04:28 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.