![]() |
External key hole lock cover
Many thanks to fellow Birder, Carl Heller, for providing me a replacement key hole lock cover for my driver's door. It includes the cover, stem, and spring.
And I haven't a clue how to install it! Any guidance available, folks? Bless all here! Matthew |
1 Attachment(s)
Hey Matthew,
Interior of door (trim panel) is going to have to be removed. Pic below shows how exterior lock removes. Thanks to Anders Richard D. Hord |
You really don't need to remove the door panel to remove and reinstall the lock cylinder. It just pulls out when you remove the retaining clip. You just have to line up the fork with the two holes in the latch mechanism when you reinstall it.
John |
You are better man than me if U can do it without removing interior door trim :D Good luck!!!
All thumbs, Richard D. Hord |
Quote:
|
Thanks, gentlemen!
|
All times are GMT -4. The time now is 09:47 PM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.