Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   Original vacuum water pump (http://squarebirds.org/vbulletin/showthread.php?t=12798)

Mickfly70 04-06-2012 09:12 PM

Original vacuum water pump
 
1 Attachment(s)
Does anyone have a lead on an original vacuum water pump. Attached is a photo of the one I got from Rick but unfortunately my wife knocked it off the table in the garage and broke the inlet/outlet stem.

Im just trying to get my ride as original as I can.

Joe Johnston 04-07-2012 10:10 AM

If you can't locate another in a reasonable time frame, this may help. I have fixed similar white plastic parts broken during collision damage. Wash thoroughly with alcohol and carefully glue with clear epoxy. Not quite as good as original, but will be un-noticable.

Mickfly70 04-08-2012 03:49 PM

Thanks Joe. I'll give that a go. I had actually lost the plastic piece for about a week but found it just today when I was vacuuming the the garage floor.

I suppose I better test the pump before I put it in.....


All times are GMT -4. The time now is 01:28 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.