Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   1963 wheel sizing help (http://squarebirds.org/vbulletin/showthread.php?t=12443)

1963BadBird 02-04-2012 01:58 PM

1963 wheel sizing help
 
Ok so I have been considering swapping out my keystones for a 20" or at least an 18" wheel. The car just about lays rocker (pitman arm bolt and oil pan first.....all soon to be fixed) I'm also in the process of making my own upper bagged control arms. I haven't had much luck with finding information about wheel widths or offsets. Obviously I don't shy away from some fab work but I want to make sure I won't have a wheel that won't tuck behind the fenders or force me to remove my rear fender skirts. Anyone with any info on what may or may not work? Thanks in advance!

YellowRose 02-09-2012 05:03 PM

1963 wheel sizing help
 
Send Tom ~ scumdog a Private Message (PM). He has a Bulletbird that he has lowered and down some air bagging on. He should be able to give you some advice.


All times are GMT -4. The time now is 10:21 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.