Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   Chrome Hash Marks Placement (http://squarebirds.org/vbulletin/showthread.php?t=11660)

YellowRose 08-12-2011 01:01 AM

Chrome Hash Marks Placement
 
Mary ~ mvd011244 has been a member for about four years and owns a 1960 Convertible Tbird. She emailed me to say that she needs some help. Hopefully, those who have been down this road before will be able to tell her where to place those hash marks. Here is what she said.

"I want to put my rear quarter ornaments (hash marks) on my car, the previous owner filled all of the holes, and painted it. I have no idea where to correctly place them now. I do not know why he did that but he did. I also had to hunt the ornaments down. Thanks for any help you can give."

kuusamon 08-12-2011 07:58 AM

one ebay auction Finished last night with a set of hashmarks but sometimes they are on ebay for a reasonable price.
the link to the finished auction is: http://cgi.ebay.com/ebaymotors/1960-...item27bd2d13ee

I know it doesn't do any good now but keep this seller in mind, he has a variety of Tbird parts for sale frequently for very reasonable prices. I bought from him several times and got more than I bargained for.

Anyway I understood that Mary already has the hash marks anyway.
If you remove the side panel inside the trunk than you can see the inside of the fender panel. Maybe you can still see the original holes. When people close of the holes to make them invisible from the outside they usually do not do the same on the inside and you might still be able to see where the holes where.
Otherwise I have to measure the location where my hash marks are put I need a reference point from where to where I have to measure. From the bumper to the hashmarks or from the top of the wing and from the rear? let me know.
But you should be able to see something from the inside.
regards,
Ron

jopizz 08-12-2011 04:49 PM

The hash marks have three different part numbers because of the different curve from front to back. I believe the holes are also spaced farther apart on the last three or four. Hopefully Mary has a complete set.

del 08-12-2011 06:42 PM

some measurements
 
1 Attachment(s)
Here is a picture with some measurements

YellowRose 08-12-2011 10:55 PM

Chrome Hash Marks Placement
 
Hi Don! Thank you for posting that picture! I am going to "borrow" it and put it in the Technical Resource Library (TRL) so that if the question comes up again, they will find the answer there. Thank you for taking the time to research it and measure it all out for Mary. I will send her an email and tell her to check it out. With what you gave her, she certainly should be able to get those hash marks back on the car.

1960_430_AU 08-13-2011 12:20 AM

2 Attachment(s)
On the hash marks at what point did they change from screws to the nut type?
My Golde has the screw type it's an early 60 and has the smooth roof trim. Did these two pieces go together?

YellowRose 08-13-2011 01:12 AM

Chrome Hash Marks Placement
 
2 Attachment(s)
Richard asked when the change from screw on type rear chrome hash marks and the smooth chrome C-Pillar molding was made. According the the VTCI Official Factory Specifications (OFS) (don't have one? Get one!) the factory made the switch from screw on type rear chrome hash marks to speed nut fastened hash marks in mid-December 1959, early in the production run. The same thing applies to the smooth chrome C-Pillar molding to the ribbed version.

I also noticed that they changed from a single screw on the headlight door at the top with a V clip at the bottom to a two screw arrangement, top and bottom later in the production run. The OFS did not say when they made the switch, except to say that early 1960 production cars had the one screw/V clip arrangement.

Here are a couple of pix from the OFS.

60 T-Bird 08-13-2011 02:57 AM

I have a complete set for a 60. You might get lucky and take out the interior side panels in the trunk. If they just bondo'd over the hole, you could back drill them...

FINSRIN 08-17-2011 03:07 AM

1960 430 AU photos
 
From side view, see that you have chrome piece around tail lights going up rear of fin. Could you please post photos showing more of chrome around tail lights. My 60 is similar color and like to see more of how chrome would look.

If did it, would not chrome original pieces. Get slavaged parts for that.

Thanks
Bill

Richard D. Hord 08-17-2011 06:23 PM

1 Attachment(s)
Hey Bill,
Here is a rear picture of Richard's Thunderbird! Richard, I hope you do not mind me borrowing your pic;)
Richard D. Hord


All times are GMT -4. The time now is 11:44 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.