I will have to ask about the oil pan. [/quote]
Just a few topics for your inquiry if you wish:
What is the intended capacity of the currently installed oil pan?
What size oil pump rotor & scroll, .875" (standard volume) or 1.100" ( hi-volume) or?
With the dyno-work, was the oil pumping volume measured? And or, impression of oil level in the pan as operating established?
My new j-code golde
David Bonvillain ~ villain continues working on his '60 Golde Top, putting in a new headliner. He has added disc brakes, and other neat goodies, and a 25-26gal custom gas tank! He was looking for a new plastic cover for the sliding roof lock, but between him and I, we found a couple of sources. He ordered one and hopes it is identical to what he has. Which is old, discolored, and a bit cracked it looked like. Here are some pix he sent me showing the work that is being done.
All the custom stainless plumbing lines are done and starting on wiring and such next.
...slowly but surely!
Paul Willson, Phone: 302-945-0571, 29760 Oliver Walcott Dr, Hillsboro DE 19966. Cell 201-481-4401 sells both the lock handle cup you are looking for as well as the sunroof panel 'lifts'. These 'lifts' raise the rear of the sunroof panel upon closing. His 'lifts' are made from brass rather than pot metal.
I just spoke with Paul regarding the Golde Top parts he has. The lock handle cup is an exact replica made from the OEM lock handle cup and sells for $35. He has sold 15-20 or so of those and still has some stock of them.The sunroof panel "lifts" are also made from the OEM ones, but his are made of brass instead of pot metal, as Harry and he said. At the moment, he is out of stock but is arranging to have more of them made, as he sold all he did have in stock. Except the ones he kept to have more made from. These are the ONLY parts that he has for the Golde Top. I am about to add his contact information to the Advertisements Forum with his permission. Harry, thank you very much for posting this information! (BTW, Paul tells me that he knew our great Founder, Alexander!) (Ray ~ YellowRose).
|All times are GMT -4. The time now is 01:12 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.