Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1964 To 1966 Flairbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=26)
-   -   64 brake conversion (http://squarebirds.org/vbulletin/showthread.php?t=22002)

nobadlie 09-24-2017 01:47 PM

64 brake conversion
My question two fold.

I want to convert my 64 drums to dics front and back.

what is the skill level needed to do this? (I've never done a conversion) and how hard is it to do?

Or should I have a shop do the work?

Ok so it's three fold


jopizz 09-24-2017 01:54 PM

There are kits available to do the front disc conversion so that is certainly a do it yourself job. However adding rear discs is another story. There aren't any over the counter kits that I know of so it will take a lot more technical knowledge and equipment to do it than the average home mechanic has. Since the fronts do most of the braking putting discs on the rears is not going to give you much better performance.


nobadlie 09-24-2017 02:04 PM

Thanks John

simplyconnected 09-24-2017 06:38 PM

I agree with everything John said but I want to add this:
There is a learning curve involved with bending brake line and using an inverted flaring tool.

If you're the type that sets his car on fire while doing an oil change, let a mechanic do this job. It requires patience, some skill and common sense.

The type of brake line you buy makes a huge difference in the quality of tools needed to do a proper job. I suggest using CUNIFER (copper/nickel/iron) brake line for two reasons. It doesn't rust and it bends and flares like butter. The cost is higher but well worth it AND inexpensive (Harbor Freight) flaring tools work just fine.

After making two or three 'test' flares, you should be a pro. I did a video about this... CLICK HERE
Many of our members have proved, you can do this job. Think ahead and have patience. If you start making mistakes, quit. Come back after taking a break when you're relaxed.

My wife's 2010 Escape came with rear drum brakes. They work just fine.
Brake kits are 'bolt-on' so they are pretty straight forward. The only 'custom' work required is the brake line and your initial booster adjustments.

Hope this helps. - Dave

All times are GMT -4. The time now is 08:51 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.