Now that the outside of the 1960 is done I am going to concentrate on the mechanical. First order of business is to upgrade to disc brakes. Based on all of my searches here I am installing the following parts:
Scarebird Brake Brackets
1983-97 S10 2WD brake calipers
1968-69 Mustang front brake rotors
ABS PowerBrake8" Dual Master Cylinder
1969-1971 Camaro front brake hoses
New inner/outer wheel bearings and seals
Two 20" 3/16" brake lines with ends
5/16" to 3/16" adapter
3/16" to 3/16" to 1/8" pipe T-fitting
1/8" to 1/8" pipe union
3/16" end plug for original block
I am starting late today so I will post steps over the next 24 hours as I complete the job.
I also upgraded to 14" wheels from Summit Racing based on the feedback here.
Step One: Get rid of the old stuff!
Step Two: Scrape off all of the old dirt and clean the mating surfaces.
Step Three: Test fit Scarebird brackets before painting.
Scarebird Brake Brackets
1983-97 S10 2WD brake calipers
1968-69 Mustang front brake rotors
ABS PowerBrake8" Dual Master Cylinder
1969-1971 Camaro front brake hoses
New inner/outer wheel bearings and seals
Two 20" 3/16" brake lines with ends
5/16" to 3/16" adapter
3/16" to 3/16" to 1/8" pipe T-fitting
1/8" to 1/8" pipe union
3/16" end plug for original block
I am starting late today so I will post steps over the next 24 hours as I complete the job.
I also upgraded to 14" wheels from Summit Racing based on the feedback here.
Step One: Get rid of the old stuff!
Step Two: Scrape off all of the old dirt and clean the mating surfaces.
Step Three: Test fit Scarebird brackets before painting.
Comment