Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   Fitting a trunk lining kit to a 61 convertible (http://squarebirds.org/vbulletin/showthread.php?t=14454)

Griffin 01-24-2013 04:03 AM

Fitting a trunk lining kit to a 61 convertible
 
Hi all

My car came with a trunk lining kit ready to be installed but no instructions. There are LOTS of pieces. The pattern looks correct according to the books I have however the pieces that are backed with board don't appear to be a good fit. Is it necessary to trim these? For example, the section that is supposed to conceal the jack is slightly too big and the holes for the top lugs are a little out as well.

Could someone supply a photo of what the finished product should look like as well as any advice on fitting please?

Thanks, as always!
Mark


All times are GMT -4. The time now is 11:33 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.