Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   Best replacement vinyl? (http://squarebirds.org/vbulletin/showthread.php?t=12810)

Rob Sumowski 04-08-2012 10:26 PM

Best replacement vinyl?
Hi Guys:

I have been looking through catalogs (Larry's, Concourse, Thunderbird Headquarters) trying to determine the best quality and most accurate seat covers to buy for my 1958 Bird. I'd like to be sure that whichever ones I buy have the standard silver welting, quality stitch work, and correct vinyl. They don't all look to be the same, though it's impossible to tell minute differences in a catalog. The prices are all comparable. Is there anyone out there who has had to buy seat covers for your restoration? Any advice on which company provides the best quality and most accurate seat covers? Also, I am looking at replacement door panels, kick panels, and quarter panels, if anyone has experience with that...

Thanks very much,

jopizz 04-08-2012 10:42 PM

I'm pretty sure all the seat covers and interior panels are made by the same manufacturer. I think they all come from the West Coast; possibly from Larry's or Thunderbird Headquarters.

Anders 04-09-2012 09:40 AM

As far as I have been able to figure out, Larrys do there own stuff. I am also pretty sure they can cut out a real sample and send it to you. I think ( have heard... ) that Dennis Carpenter is the company who do interior parts for most other vendors. Perhaps thay also send samples on requests?

tbird430 04-09-2012 11:09 AM

All of the above posts are true.

My best advice is to order all of these interior "color coded" trim pieces at the same time, to get the best possible color match. I like Concours Parts & Accy's myself....


Rob Sumowski 04-09-2012 08:23 PM

Okay, I called Larry's and Concours:

Concours said that the original black/white vinyl seat covers had white horizontal pleats on both the front and back of the bucket seats.

Larry's disagreed, saying that the original black/white vinyl seat covers had white horizontal pleats on the front and flat black on the back of the bucket seats.

I have seen 58 Birds with both variations.

Which one is correct?

Both agreed that the seat covers should have silver welt.

jopizz 04-09-2012 09:31 PM


I have a '58 convertible and the back panel is flat white vinyl, not ribbed. On my '59 it's ribbed.


tmjsong1aolcom 04-11-2012 01:11 AM

I will post an answer when home again.

I am currently in Mason City Ia staying at a Frank LLoyd Wright designed hotel. Grew up here but never realized these were his designs. Of course I was a kid.

Sun Prairie, Wi

tmjsong1aolcom 04-13-2012 12:28 AM

This info ony pertains to 58/59 birds. I need to spend additional time reviewing info for 60 birds.

The rear of the front seats is covered with a panle. This panel is a fiberboard material that is covered wint a off white vinyl that is heat molded with ribs that about 1 inch apart. Measurement is a guess but will fill in the number tommorrow. This pertains to all vinyl/vinyl and vinyl/cloth interiors. The reproduction materials being supplied are not a match to the original material in any form as of a couple years ago. When my 58 was done we used the old panels after they were cleaned up.
Do not thro out your old seat back panels.

Leather was not available until 1959 and 1960. In this case the entire interior was all the same color and the seat back panels matched the interior color. Note this only applies to leather interiors.

I am attaching a pic of the back panel from a 7000 mile 59 bird.I will have to have Ray add the pic as it is too big.

I will get a pick of the off white panel tommorrow and get it posted.

Good Luck
Sun Prairie, Wi

YellowRose 04-13-2012 01:31 AM

Best replacement vinyl?
1 Attachment(s)
Here is the pic that "Fuz" asked me to resize. Luckily, I have use of my roomies laptop at the VTCI Regional Convention in Austin and can do this for him.

Jimz Bird 04-13-2012 01:39 AM

Nice job on the re-size Ray.

Have a good time at the Forum. Sure hope they didn't give you a room with a water bed.;)

All times are GMT -4. The time now is 05:58 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.