I was able to actually drive several miles today and actually made it home too without any excitment or strange noises. Stop almost all the bleeding (A/T and P/S leaks).
I'm putting the final pieces of the dash back together and have one question on the jigsaw puzzle. Left and right under dash plates are screwed in. The center support plate with the control panel for the temp. is my problem. There are two holes at the bottom of the part that holds the cable control head (not the painted outer cover). Does the control unit support go behind or on top of the center console metal cover and do screws go through these holes. I realize that two screws go through the outer painter panel into the control head support but what about the holes at the bottom?
Almost there.
I'm putting the final pieces of the dash back together and have one question on the jigsaw puzzle. Left and right under dash plates are screwed in. The center support plate with the control panel for the temp. is my problem. There are two holes at the bottom of the part that holds the cable control head (not the painted outer cover). Does the control unit support go behind or on top of the center console metal cover and do screws go through these holes. I realize that two screws go through the outer painter panel into the control head support but what about the holes at the bottom?
Almost there.
Comment