during my restoration I came across this rust issue behind the front bumper upon removal. Its located on the lower part of the front frame behind the front bumper where it connects to the radiator support. It approx 4inches long by 3 inches wide of rot. The sides of the frame are fine, but the lower part is where the damage is. Its only on the passenger side. Since the car is technically a unibody would I be safe to weld in some new metal and cut out the rust.
I resized this to the 800x600 on photo bucket. Sorry if I didn't do it correctly
I resized this to the 800x600 on photo bucket. Sorry if I didn't do it correctly
Comment