Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1960 To 1970 American Ford Falcons - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=28)
-   -   interchangealbe fenders from 60 through 63? (http://squarebirds.org/vbulletin/showthread.php?t=21529)

gregrock68 05-03-2017 11:12 AM

interchangealbe fenders from 60 through 63?

I am newbie to the Falcon's (although thoroughly vetted on the Mustang's over the years) That being said, I purchased a 1960 Falcon and need a a front driver side fender. Digging into the fenders and fitment it appears that the 1960 through 1963 might all be interchangeable between these years??? I cannot confirm/find anything definitive therefore I am reaching out to you for assistance since the vast majoirty of parts that are available are 1962 and 1963 models. Thanks in advacne for your help


jopizz 05-03-2017 04:50 PM

The fenders are not interchangeable from '60 to '63. '60 and '61 are the same but '62 and '63 are different. The area around the headlights and grill are different. You may be able to change the entire front end if you want to go that route but just the fenders themselves aren't interchangeable.


All times are GMT -4. The time now is 03:35 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.