Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   Rear seat support - which one is correct? (http://squarebirds.org/vbulletin/showthread.php?t=22203)

p38fighter 11-28-2017 02:51 PM

Rear seat support - which one is correct?
 
2 Attachment(s)
1959 Convertible

One of these supports is not right. The driver side has a sharp upward angle and the passenger side is level with the floor.
I'm guessing the driver side is deformed. Correct?

Driver side on left Passenger side on right

simplyconnected 11-28-2017 03:53 PM

Your seat bottom hooks into these. One may be too straight but not necessarily. You will know when you put the seat bottom back in place. If it lifts out too easily, bend it back down slightly.

Like most trim, no two pieces are exactly the same so it becomes 'custom fit'. There is plenty of metal there to make adjustments. Even if you don't move the bracket, nobody can tell the difference once the seat is in. - Dave

Tbird1044 11-28-2017 04:08 PM

3 Attachment(s)
Chris:
Here are some pics I found. Hope they might help you out.

Nyles


All times are GMT -4. The time now is 11:17 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.