Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   My motor numbers (http://squarebirds.org/vbulletin/showthread.php?t=21810)

bygrace 07-28-2017 05:00 PM

My motor numbers
My heads read: C8AEH. Does that mean 1968? Does the H mean anything? I only see four characters discussed on the forum. Thanks.

YellowRose 07-28-2017 05:39 PM

My motor numbers
Here is the breakdown for this.

C8AEH - C=Decade=1960's, 8=1968, AEH=A=Ford, E=Engine Engineering, H=?

As you can see C=the Decade, in this case, the 1960's. 8=the Year, 1968. A=Ford (Full Sized) (S would have indicated a Tbird from 1958 up...). E=Engine Engineering. H=? Normally, a Ford part number looks like this C8AE-6000-A. The 6000 tells you it is an Engine part, and the A tells you it is the first time the part was made. A B, C, D, etc, gives you the 2nd, or 3rd or 4th revision, etc... Here is a website that explains it.


bygrace 07-28-2017 06:40 PM

Well well. I always wondered what engine that is. All I knew was 'obviously not original'. I was just doing a set of plugs and I remembered reading about those numbers here on the forum. I guess I now know more than I ever did. BTW What displacements did Ford cars have in '68?

bygrace 07-29-2017 01:23 PM

I read the website you suggested. Thanks. I'm going to look into that block number on the front corner. See what kind of mixture I have. Thanks again. Mike S

YellowRose 07-29-2017 01:40 PM

My motor numbers
Mike, I hope the website I sent you gave you a lot more information. As for your question regarding displacements for the 1968, someone else who knows that will have to give you the answer.

Here is another website that will tell you a lot about your 1960 Squarebird.


jopizz 07-29-2017 01:49 PM

This site has a lot of great reference material including your C8AE-H heads.



simplyconnected 07-29-2017 02:15 PM

It's off subject but this breaks my heart:

72-77 460 Ford, Mercury
Bore: 4.362" Stoke: 3.85"
hp: 212 @ 4400rpm
torque: 342 @ 2800rpm
Comp. Ratio: 8.5:1
Carburetor: 4v Motorcraft 4300

We get more HP than that from an engine with 100 cu inches LESS. It's no wonder Ford stopped this lunacy.

bygrace 07-31-2017 08:06 PM

Ho-Lee-Cow. Very interesting website. Thanks. I've got the fever now. Now I wanna find my block number. See what the rebuilder put together.
I never met the guy I bought it from so I never knew much about it. It was on a lot in CA on consignment. My wife had a white one when we got married in '64. So I made an offer and the lot guy said he didn't think the owner would take it. We came home and they called and said he took it! Our relatives went over and bought it until we came out to drive it back to IN.
I'm curious now. Thanks again.

All times are GMT -4. The time now is 09:32 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.