Announcement

Collapse
No announcement yet.

Dennis Carpenter Ford Restoration Parts

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dennis Carpenter Ford Restoration Parts

    Dennis Carpenter Ford Restoration Parts has a great supply of parts for our Tbirds. Not only for our Tbirds but for Big Ford also. On the right side is a list of the catalogs. They have them broken down by years. There is one especially for Tbirds only. It has some 90 pages in it. You can open it by clicking on the floopy or you can right click on it and save it to your hard drive. Here is the contact information.

    To Order call - 800-476-9653

    For Technical Assistance call - 704-786-8139 ext. 3062 and ask for Doug

    They are located in Charlotte, NC and have a lot of NOS parts.

    http://www.dennis-carpenter.com/
    Last edited by YellowRose; January 13th, 2015, 03:27 PM.

    Ray Clark - Squarebirds Administrator
    '59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
    "It's Hip To Be Square"
    Thunderbird Registry #33025 VTCI #11178

    Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

  • #2
    Very good company. I used to buy parts for my 51 ford there. What can I say! I ran out of ROOM..........

    Comment


    • #3
      Have had mixed ...

      results with them. Some things were very good, and others not so hot. Mike

      Comment


      • #4
        You have to watch... They use the dollar amount for shipping costs. One year they ran a special on badges and rubber pads. I had $150 order of plastic and various rubber parts (mirror bases, etc.). Shipping was through the roof while everything fit in a padded envelope.

        They will work with you... I called, spoke with a manager, and they finally agreed with me. That knocked fifteen bucks off the shipping. He said they normally won't do that.

        I find other vendors sell Carpenter-made parts cheaper than Carpenter does. tee-bird.com is one of them. - Dave
        My latest project:
        CLICK HERE to see my custom hydraulic roller 390 FE build.

        "We've got to pause and ask ourselves: How much clean air do we need?"
        --Lee Iacocca

        Comment

        Working...
        X