Announcement

Collapse
No announcement yet.

New gears

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New gears

    Hey ya'll need a little help here can anybody tell me the gear diameter size in a 67 rear I have been told 9 in but also have been told 9 3/8 did they use both sizes ? And is there any aftermarket gear sets available for the 9 3/8 ?

  • #2
    They did use both sizes in '67. Does your rear have the ID plate on it. If it does look for the letters WDC or WDT. WDC is a 9" and WDT is 9 3/8.

    John
    Attached Files
    John Pizzi - Squarebirds Administrator

    Thunderbird Registry #36223
    jopizz@verizon.net 856-779-9695

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment


    • #3
      New gears

      Yeah the tag is there but it is so rusted can't read it lol guess I will just have to pull it and measure thanks for info this is my first ford and learn in as I go lol

      Comment


      • #4
        New gears

        JT, before you pull it, try cleaning that tag with different types of cleaning solvent. If you can clean it enough to see the WDC or WDT that will tell you which you have in there... Unless someone changed things out and just left the tag there...

        Ray Clark - Squarebirds Administrator
        '59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
        "It's Hip To Be Square"
        Thunderbird Registry #33025 VTCI #11178

        Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781

        http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

        Comment


        • #5
          New gears

          Thanks John appreciate your knowledge it's 9 in wdc thanks saved me lot of work

          Comment


          • #6
            You're welcome. Glad I could help.

            John
            John Pizzi - Squarebirds Administrator

            Thunderbird Registry #36223
            jopizz@verizon.net 856-779-9695

            http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

            Comment

            Working...
            X