Announcement

Collapse
No announcement yet.

Temperature Guage Out?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Temperature Guage Out?

    Ok somewhere between the parts store and my garage the fuel guage magically started working again but now the temperature guage doesnt work...at least not the way it should. The needle stays around the C and then all of a sudden will move to the center of the C and H then go back to the C position? Anybody know whats going on or experienced this before because i seriously doubt the engine is running cold all the time.

  • #2
    RE: Temperature Guage Out?

    Check your Gauge voltage regulator. It runs both the temp and fuel gauges. Its located on a bracket behind the clock. Look at a 62/3 manual, there are some tests you can do to determine if thats the problem....
    good luck, :+

    Comment


    • #3
      RE: Temperature Guage Out?

      thanks ill tear it apart this weekend, are there reproduction reducers available?

      Comment


      • #4
        RE: Temperature Guage Out?

        There are replacement voltage regulators available.

        Try one of the vendors on our links page on the Squarebirds main site.

        Alexander
        1959 Hardtop
        1960 Golde Top
        Alexander
        1959 Hard Top
        1960 Golde Top
        sigpic

        Comment

        Working...
        X