Announcement

Collapse
No announcement yet.

1963 wheel sizing help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1963 wheel sizing help

    Ok so I have been considering swapping out my keystones for a 20" or at least an 18" wheel. The car just about lays rocker (pitman arm bolt and oil pan first.....all soon to be fixed) I'm also in the process of making my own upper bagged control arms. I haven't had much luck with finding information about wheel widths or offsets. Obviously I don't shy away from some fab work but I want to make sure I won't have a wheel that won't tuck behind the fenders or force me to remove my rear fender skirts. Anyone with any info on what may or may not work? Thanks in advance!

  • #2
    1963 wheel sizing help

    Send Tom ~ scumdog a Private Message (PM). He has a Bulletbird that he has lowered and down some air bagging on. He should be able to give you some advice.

    Ray Clark - Squarebirds Administrator
    '59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
    "It's Hip To Be Square"
    Thunderbird Registry #33025 VTCI #11178

    Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment

    Working...
    X