Nicely done Keith.
Announcement
Collapse
No announcement yet.
1959 T-Bird Build
Collapse
X
-
-
Is the grille available?
Is the grille available?
Anyone looking for bird parts? I have been given the ok to sell off the parts not being used.
All parts are off of the 59' bird I am currently working on.
A running 352 with working automatic when removed from the car in 2010. Factory a/c, vent windows, pot metal body parts, emblems , door handles, chrome pieces, front brakes drums, rear glass, radio etc..
KeithRegards,
Don Vincent
Amherst NY
1960 HT 352
TBird Registry 34042Comment
-
👍 1
Comment
-
Been away for a while, but needed to see how Kieth are doing with this babyComment
-
We are getting close. I've been asked not to share any pictures until completion.
KeithComment
-
Comment
-
Keith I agree with Doug. Certainly you could post some " snip it " pixs of your progress similar to the grille shot you posted earlierDano Calgary,Alberta Canada
Thunderbird Registry
58HT #33317
60 HT (Sold )Comment
-
Here's some pictures of the Front Fender rear aprons. There were front ones but no rear ones. That might explain why there was so much rust in the torque boxes and rockers. I made new ones. Used ones seemed expensive to buy and cut up to fit the new opening. I repaired the front ones. I still need to weld some braces on the front ones and the rear ones.
20190219_200500.jpg 20190220_204124.jpg 20190220_204157.jpg 20190224_092606.jpg 20190227_175343.jpg👍 4Comment
-
Keith very nicely done and very talented. Brings a whole new meaning to " Tin Bashing "Dano Calgary,Alberta Canada
Thunderbird Registry
58HT #33317
60 HT (Sold )Comment
-
Comment
-
Comment
-
Comment
-
We are installing the engine and transmission. I will post pictures of the motor mounts and transmount . Going to the salvage yard to find a drive shaft Saturday.Last edited by keith; September 30, 2020, 01:57 PM.Comment
-
Holy cow time fly's by. Making progress, but not as fast. I'm not a mechanic so I have to make stuff I'm not familiar with. Engine and trans is now installed so I'm back to figuring out how to mount a aluminum radiator,making brackets,etc..
Here's pictures of the motor mounts and trans mount.
filedata/fetch?id=244468&d=1601493369&type=thumb filedata/fetch?id=244469&d=1601493370&type=thumb filedata/fetch?id=244470&d=1601493369&type=thumb filedata/fetch?id=244471&d=1601493370&type=thumb
Attached FilesYou do not have permission to view this gallery.
This gallery has 7 photos.Comment
Comment