Announcement

Collapse

Down for Maintenance

Squarebirds.org will be down for a few hours on Sunday morning (Feb. 24th) just after midnight Eastern Standard Time, for maintenance. Eastern time is Coordinated Universal Time (or UTC-4), for all our international members. - Dave
See more
See less

Edelbrock Performer RPM

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Edelbrock Performer RPM

    Next spring I will be installing a new 390 long block in the Thunderbird...the 352 is worn out. I will also be making some other modifications at the same time. The new long block has a mild performance cam installed.

    I have purchased and will be instlling shorty headers and a 2 1/2' exhaust, 600cfm Edelbrock carb and a Edelbrock Performer RPM intake manifold. My question is, will there be a hood clearence problem due to the intake manifold.

    Thanks for your help.

    Steve
    390, Mild Cam, Headers, 3.70 rear, 2-1/2" Exhaust, Edelbrok Performer RPM Intake, Holley Street Avenger 670 Carburetor, One Wire Alt, Petronix Ignition. She's All Go and No Show.

  • #2
    RE: Edelbrock Performer RPM

    Steve
    I would think that you should be able to fit the new carb as you can fit a pancake type air filter so the hood will shut. I have seen a 600cfm on a fe block and its not that much higher than the original so let mw know how you get on.
    Kevin.

    Comment

    Working...
    X