Announcement

Collapse
No announcement yet.

Quarter window seal installation ? with photo

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quarter window seal installation ? with photo

    59 convertible

    Does the "flap" on this seal go to the inside or outside of the car?

    Does the stepdown in the seal end go to the top of the window or the bottom?

    Thank you...
    Attached Files

  • #2
    The flap goes toward the inside of the car so the door window overlaps it. The step down goes on the top. The factory also put a bevel cut on the bottom of the seal so it doesn't catch on the pillar post.

    John
    John Pizzi - Squarebirds Administrator

    Thunderbird Registry #36223
    jopizz@verizon.net 856-779-9695

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment


    • #3
      Thanks as always

      Comment


      • #4
        Awesome! Thanks. I had same question. The drawings donít have sufficient detail.
        sigpic

        CLICK HERE for Jim's web site

        Comment


        • #5
          I had to trim the bottom of the seal where it is beveled so it wouldn't catch on the pillar post. No big deal, but the seal was catching on the lip of the pillar post. This may depend on how your windows are adjusted.
          Nyles

          Comment

          Working...
          X