Announcement

Collapse
No announcement yet.

Water control valve location help please

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Water control valve location help please

    1959 convertible

    My car was originally an A/C car but is no longer. I have converted the fan box to non A/C. The question is where does the Bowden cable for the water control valve penetrate the firewall? I assume it would have to be on top of the heater core nipples.
    Per the attached photo can someone measure and you tell me how high up I need to drill. Thanks, Chris.
    Attached Files

  • #2
    Are you putting an external valve in the engine compartment? The original valve is on the heater core. Here's where I drilled mine so it would reach.

    John
    Attached Files
    John Pizzi - Squarebirds Administrator

    Thunderbird Registry #36223
    jopizz@verizon.net 856-779-9695

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment


    • #3
      Funny - I went the opposite way and added A/C.

      This is a pic of the firewall before I cut out for the evaporator box (the arrows were just pointing out mounting holes). No cable coming out - the vacuum operated water control valve is under the passenger side dash.



      Mac's OEM style


      Mac's replacement type which does use a cable - not sure if you mount it under the dash or in the engine compartment.


      Eric

      edit.....I see John is a bit quicker on the draw than I am - heh.

      Comment


      • #4
        Thank you John and Eric - yes I am using an external valve.

        Comment

        Working...
        X