Announcement

Collapse
No announcement yet.

Speedo Driven Gear

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Speedo Driven Gear

    I have completed a third member swap in my 1960 Thunderbird going from a 3.10 (stock) to a 2.75. I am now searching for a speedo driven gear for my cruisomatic transmission so the speedometer reads more accurately. Using the following gear calculator, it appears that I need a 17 tooth gear with my 26.7 diameter tires and 8 tooth gear in the transmission.

    http://www.tciauto.com/tc/speedometer-gear-calculator/

    Does anyone know the gear type (Type 2, 2A, 3, or 3A) that the cruisomatic transmission uses? Next, would anyone know the part number that would have 17 teeth? Any information or assistance would be much appreciated.

    Respectfully,

    Lance

  • #2
    The Ford parts book doesn't list a type, however for a COM transmission the part number for the 17 tooth gear is B8A-17322-B. The color is brown. Hope this helps.

    John
    John Pizzi - Squarebirds Administrator

    Thunderbird Registry #36223
    jopizz@verizon.net 856-779-9695

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment


    • #3
      If you can't find that part number I found some more info in a later parts manual. It lists a 17 tooth COM gear as C3DZ-17271-B; green or white, type 3A.

      John
      John Pizzi - Squarebirds Administrator

      Thunderbird Registry #36223
      jopizz@verizon.net 856-779-9695

      http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

      Comment


      • #4
        John,

        Thanks for the part number. I will call my local Ford dealership tomorrow to see if the part is available.

        Lance

        Comment


        • #5
          I doubt your local dealer will have it. If they don't try here.

          http://www.macsautoparts.com/ford_th...a-1964-66.html

          You can probably find them on Ebay a little cheaper.

          http://www.ebay.com/itm/NOS-FORD-SPE...tZKCvJ&vxp=mtr

          John
          John Pizzi - Squarebirds Administrator

          Thunderbird Registry #36223
          jopizz@verizon.net 856-779-9695

          http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

          Comment


          • #6
            I ordered the gear on ebay this morning. Thanks for the link!

            Comment


            • #7
              I was able to order both gears. When I received them, I noticed that they were of different diameters. Specifically, the B8A-17322-B measured .841 in diameter (outside of teeth) and the C3DZ-17271-B measured at .770 in diameter.

              I measured the gear that I am replacing and it measured .860. So, I installed the B8A-17322-B gear as it was closer to the original size.

              Comment

              Working...
              X