Announcement

Collapse

Down for Maintenance

Squarebirds.org will be down for a few hours on Sunday morning (Feb. 24th) just after midnight Eastern Standard Time, for maintenance. Eastern time is Coordinated Universal Time (or UTC-4), for all our international members. - Dave
See more
See less

Horn Ring

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Horn Ring

    I know the assembly of the horn ring to the steering wheel has been covered a bunch of times. But I think this is actually a new question.

    Should the horn ring and retainer move freely up and down when mounted to the steering wheel?

    When I press on the ring my spring inside the retainer on the top of the steering wheel does not compress. The horn ring just flexes or bends slightly. I'm wondering if the retainer that I have is from a vehicle that is not a Thunderbird.

    My car had a steering wheel from another model/year in it when I purchased it. So I've never seen the right wheel assembly.

    Does anyone know where I can get part #'s 3660 & 3629. [I'm using the Thunderbird Headquarters assembly drawing as a reference]
    Last edited by kevin_tbird; August 19th, 2011, 06:33 AM.

  • #2
    Horn Ring

    One of the best persons to answer that question might be Carl ~ partsetal. He also probably has the right parts from one of his parts cars. Send him a Private Message (PM) and ask him to view your post and ask him if he has those parts.

    Ray Clark - Squarebirds Administrator
    '59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
    "It's Hip To Be Square"
    Thunderbird Registry #33025 VTCI #11178

    Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781

    http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

    Comment


    • #3
      This is frustrating. I purchased another horn assembly (minus the horn ring) and found that mine was exactly the same. So I believe I am working with the right parts.

      After reassembly I was pushing on the horn ring at various points - and the horn ring broke where the spokes connect to the flat plate. @#$%!

      I am only getting about 1/16" of movement in the base triangular plate. Most of the motion comes from the flex of the horn ring (which is now broken).

      Anyone who has their steering wheel off. I'd really like to know how much motion there should be in the contacting plate.

      Thanks

      Kevin

      Comment


      • #4
        Hope these pictures help.
        My latest project:
        CLICK HERE to see my custom hydraulic roller 390 FE build.

        "We've got to pause and ask ourselves: How much clean air do we need?"
        --Lee Iacocca

        Comment


        • #5
          reply. I've got all the right parts in the right order. I guess I just expected more travel in the contacting ring.

          Comment


          • #6
            are you having trouble with the horn ring contacting the spring on the left side (which complets the circuit which trips the relay to blow the horn) ?

            If so your steering column may need to be pulled out some to reduce the gap. They slip over time. People then lean on the poor horn ring more and the spokes get broken.

            Mine came with a broken ring. Had little luck getting it
            repaired, finally got a good one on Ebay.
            1958 Hardtop
            #8452 TBird Registry
            http://www.tbirdregistry.com/viewdat...tryNumber=8452


            photo: http://www.squarebirds.org/users/joh...d_June2009.jpg
            history:
            http://www.squarebirds.org/users/johng/OCC.htm

            Comment

            Working...
            X