Glad to hear you are back in the wrenching mode Marcelo. You're gong to really enjoy driving the car with disc brakes - wish mine was back on the road (blown rear main seal). Thanks for the pics and letting us follow along - as Dave mentions great pics (almost as good as mine ).
Might want to throw a small heat shield on the bottom of your prop valve since it will be right over the manifold ??? Not worried too much about the heat on the valve but rather on that plastic failure switch screwed into it. That stock booster bracket may get it all up high enough not to worry about.
I had to extend my brake light wires when I mounted my prop valve down on the frame but looks like yours can stay stock - cool.
Can't wait to hear your comments after the first disc brake drive.....
Eric
Might want to throw a small heat shield on the bottom of your prop valve since it will be right over the manifold ??? Not worried too much about the heat on the valve but rather on that plastic failure switch screwed into it. That stock booster bracket may get it all up high enough not to worry about.
I had to extend my brake light wires when I mounted my prop valve down on the frame but looks like yours can stay stock - cool.
Can't wait to hear your comments after the first disc brake drive.....
Eric
Comment