Announcement

Collapse
No announcement yet.

56 Clutch Set

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 56 Clutch Set

    What Is The Disk Size And Pilot Hole Size On A Baby Bird Clutch? is It 11 Inch 10 Spline 1 Inch Pilot Hole? Where Can I Get A Complete Set/ Kit?..thanks Kenn
    sigpicWHITE 60 HARDTOP AND 46 FORD SEDAN STREET ROD TBIRD REGISTRY #61860 920-286-2277

  • #2
    You are right with 11 inch 10 spline disc. The Ford parts book shows pilot bearings, a #70-7600-B 1.575"/1.576" O.D.-.6715"/.6725" I.D -
    .495"/.505" thick and a #B-7600-A 1.5743"/1.5748" O.D. = .6689"/.6693" I.D. - .4674"/.4724" thick , for yrs. 49-57 cars and Tbirds.

    Comment


    • #3
      Does It Say Anything About The Size Of Input Shaft? Where The Spline Shaft Goes Into The Disk? Thanks Kenn
      sigpicWHITE 60 HARDTOP AND 46 FORD SEDAN STREET ROD TBIRD REGISTRY #61860 920-286-2277

      Comment


      • #4
        No, I looked up the input shaft and it did not give that dimension. I want to say that it is 1 inch but there are too many cobwebs in my head to swear to it. I do have a transmission in my garage, I will go out and measure it in awhile if I can find my calipers (cobwebs again).

        Comment


        • #5
          It is 1 inch .

          Comment


          • #6
            Thanks Wade For Your Help. So Far All Im Finding Is 1 1/8 Inch. Do You Know A Supplier For The Plate, Disk And Bearing? Kenn
            sigpicWHITE 60 HARDTOP AND 46 FORD SEDAN STREET ROD TBIRD REGISTRY #61860 920-286-2277

            Comment


            • #7
              I measured 1 inch for the input shaft itself I don't have a clutch disc to measure the actual hole. I checked CASCO Thunderbird parts catalog and they show that they carry the disc, pressure plate, pilot and throw out bearing. They sell only 55-57 Tbird parts so what they have should fit. There are quite a few Tbird parts suppliers out there I would guess that most of them have the clutch parts you need.

              Comment

              Working...
              X