Announcement

Collapse
No announcement yet.

1956 T-Bird engine bolt torque spec's

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1956 T-Bird engine bolt torque spec's

    I'm at a total loss, been trying to find all the bolt torque spec on my 1956 292 Y-block and I just can't seem to find them, anyone have a quick guide to heads and valve train???
    Thanks Charley

  • #2
    Torque specs are different, depending on what lube and bolts you use. ARP bolts have their own torque specs when used with their moly lube. CLICK HERE for their chart.

    In my engine building experience (before ARP came around), I always chase the threads, clean out the holes and check for depth clearance. I mix STP with 10W-30 oil in a cup with a small brush so that the consistency just hangs onto the bolt. I brush a little into the female threads and I coat the bolt threads. That takes care of my moly lube.

    For bolts that pass through water jackets, I dry the bolts and use a Teflon pipe paste (PTFE), available at all the box stores.

    Your head bolts are 7/16" diameter grade 6, not 1/2" grade 8. Be careful not to over tighten them or one will break, like this one did: CLICK HERE Yes, I've been there.

    The Service Manual for your engine says the following:
    Head bolts - 75 Ft/lbs. (hot). (I wouldn't go passed 70)
    Intake Manifold - 23-28Ft/lbs.
    Rocker Shaft to Cylinder Head - 12-15Ft/lbs. (I would go to 20)
    Valve Rocker Arm Adjusting Nut - 30-35Ft/lbs.

    I hope you cleaned out your rocker shafts & rocker arms, slotted the oil holes,

    and plugged that bypass tube on the end (to pressurize the shaft):


    - Dave
    My latest project:
    CLICK HERE to see my custom hydraulic roller 390 FE build.

    "We've got to pause and ask ourselves: How much clean air do we need?"
    --Lee Iacocca

    Comment


    • #3
      Thanks Dave, I can go back to work.
      Charley

      Comment


      • #4
        You should buy a shop manual. All the specs you need, including torque specs, are in there.
        Midland Park, NJ
        56 TBird, 54 Ford, 48 Ford,

        Comment

        Working...
        X