PDA

View Full Version : Vacuum can


cracken32racer
08-16-2017, 11:04 AM
There are 2 ports on one end the end of the can, one in the center, the other off set. Which port takes the hose from the engine ? (vacuum in)

jopizz
08-16-2017, 01:10 PM
If I'm not mistaken one port is larger than the other. The larger port is usually the intake from the manifold. If they are both the same size connect the center to the intake.

John

cracken32racer
08-16-2017, 01:26 PM
John,
They measure the same, I will connect the center port to the manifold.

Thank you,
Bill