PDA

View Full Version : windlace


bpetska
02-11-2017, 10:37 AM
I was looking thru the vendor catalogs and notice two types of windlace. Cloth and vinyl. Which type is prefered? Is one easier to install than the other?
Thanks,
Bill

jopizz
02-11-2017, 10:52 AM
You want the cloth windlace for your '60. I recommend getting the windlace that has the kraft paper like the original. It's held in place by clips. You need to remove the rear arm rest and quarter trim panel to install it in the back. As for the front you need to remove the kick panel, metal trim and the dogleg trim piece. It's put on at the factory before the dash pad is put in so you need to tuck it between the dash pad and the body. You may need to use some trim adhesive to keep it in place since you will have no access to the clips.

John