PDA

View Full Version : Ignition Lock Cylinder removal


SirBB
01-30-2017, 10:52 PM
Hi guys, I can't figure out how to remove the ignition lock cylinder on my 60. I found a few posts mentioning a pin that needs to be pushed in, but I don't know what pin. I saw the post with a link to a Falcon site, but the link is no longer valid. Could somebody post instructions preferably with some pictures. Once I figure it out I will be pappy to wright it up so you can add it to the technical library.

Thanks

jopizz
01-30-2017, 11:33 PM
You need to remove the ignition switch from the instrument panel to access the pin. You can just barely see it between the spring in the picture. You need to push the pin in and turn the key to the right. It should pop out.

John

Hogan
01-31-2017, 10:17 PM
The following YouTube video may help.

https://m.youtube.com/watch?v=zwzPJ-UC0D4

SirBB
02-01-2017, 12:31 AM
Thanks, that's a huge help.