PDA

View Full Version : Seat Pivot Pin Removal


IronArtForge
03-20-2016, 11:17 AM
I am trying to remove the seat pivot pins on my '63. They do not appear to be threaded or have any kind of retainers olding them from the back side. Does anyone know how tthese come out?

jopizz
03-20-2016, 11:34 AM
As far as I know the pivot pins are part of the frame and are not removable. Why do you need to take them out.

John

IronArtForge
03-20-2016, 11:57 AM
I want to remove the plastic side panels which are in poor shape. These surround the pivot pin. I am also putting new upholstry on the seats. 52938S appears to be what I am trying to remove.

simplyconnected
03-20-2016, 12:03 PM
Simply pull the cotter pin then use a long flat screwdriver to pry the leg off the pin. That's how it's done. - Dave

jopizz
03-20-2016, 12:07 PM
52938-S is just a screw that holds the trim piece to the back support. Remove the trim and you will be able to remove the seat back as Dave mentioned.

John

IronArtForge
03-22-2016, 07:49 AM
Simply pull the cotter pin then use a long flat screwdriver to pry the leg off the pin. That's how it's done. - Dave

I found the pins and got it apart. They were hard to see under all the old dirt.... Thanks for the help.