View Full Version : Two 64 hardtops, one 60 hardtop, all parts cars
02-16-2015, 10:19 AM
Spotted at 109 UPull-it 3459 Thomasville Road, Winston-Salem, NC.
The black 64 is almost intact with engine and transmission. I'm pulling splash shields from it later this week after the weather clears. If anyone needs anything let me know and I'll pull it at the same time. I'll charge $25/ assembly to remove plus what they charge me (their costs have been very reasonable so far) plus shipping.
Or you can call them directly. Great folks!
02-16-2015, 10:22 AM
This car is nearly intact. I'm not sure what shape the frame is but it looks like it could be restored.
02-16-2015, 10:23 AM
No engine and transmission in this one.
02-16-2015, 10:24 AM
Not nearly in the shape of the other two.
02-16-2015, 10:25 AM
03-08-2015, 01:20 AM
Did either of the '64s have decent steering wheels? I grew up not 10 minutes from there and my parents are still there. Would definitely make the trip if a steering wheel could be had.
03-08-2015, 07:24 AM
They have splits in them, like they all do. Next time I'm out there, which should be next week, I can take pictures.
03-08-2015, 11:58 PM
Yeah, that figures. Pictures would be appreciated. There's a few other hard to find odds and ends I need so I might just make the trip up there regardless. Thanks for the reply though, was hoping (against hope) there would be one without the splits.
03-09-2015, 09:46 AM
I had my splits repaired by a member here. Epoxy and a special paint. I replaced the chrome strip with a press on extrusion, and it looks great.
03-11-2015, 07:21 PM
The steering wheel on the white one is actually in very good shape. I don't see any splits. PM me with your email for a high res photo. It's a Landau model so it has the chrome trim on the upper as well as the lower.
03-15-2015, 12:13 PM
Do you still have a steering wheel for sale, and would you ship to denmark? I have a '64 Landau with an un-original steering wheel.
03-16-2015, 12:00 AM
I've had some inquiries on the steering wheel in the white car. Please read the original post.
Also, the best way to restore the chrome trim is to use this material: http://cowlesproducts.com/cowles-custom/cc_chrome-accessorizing-molding/ 1/4" material # S37740
More information here: http://www.squarebirds.org/vbulletin/showpost.php?p=76103&postcount=21
vBulletin® v3.6.8, Copyright ©2000-2017, Jelsoft Enterprises Ltd.