View Full Version : windshield whipers

07-29-2014, 05:26 AM
hello, I'm new here. I'm from Germany. I restore currently a 60 tbird. I have the wiper motor and the cables installed as before. the wipers are now showing up in the idle status. is the correct? I do not think so:confused:
thanks, stefan

07-29-2014, 08:36 AM
Hello Stefan,
Welcome! Here is a photo of what the cables should like at the motor. I do not have any photos of the cables at the actual wiper mechanism. Hope this helps.

07-29-2014, 10:44 AM
Stefan, check the Technical Resource Library (TRL) for information on the wiper set up. You will find the link to it right below my signature element.

07-29-2014, 03:30 PM
I had everything installed as shown on the diagram. I think it's impossible to do otherwise. and now the wiper blades are straight up. if I turn on the motor, then it would move in the direction of the engine compartment and not on the windshield. I hope I can express for the dialect-correct me here. :-)
but thanks anyway for the effort. If I find time, I'll post photos. Have the tbird frame off restored and it's missing is the engine for installation