PDA

View Full Version : Forward Height Adjusting collar...


denis4x4
07-04-2012, 10:54 AM
...i need one! Also need front sliders. Next best thing would be some leads for sourcing Golde top parts. Called ASC and all of their inventory of old parts went away.

YellowRose
07-04-2012, 12:41 PM
Dennis, look at the thread right above this, and the one right below this thread. There is a Parts List above it and one titled Ouch.... below it. They have a listing of what companies I know of that hopefully will have parts you are looking for. Also check the Technical Resource Library (TRL) by clicking on the link to it in my signature element. It is always there. Good luck and let us know if you find what you need and where.

denis4x4
07-04-2012, 11:38 PM
YellowBird....checked everyone of those links and no dice. I can get the sliders from the BMW site, but nothing on the adjusting collar.

YellowRose
07-04-2012, 11:45 PM
Hi Dennis, Did you email those companies and not just check their websites? I would suggest that those in the US that you call on the phone and talk with them. You don't have to tell them that you are looking for parts for a '60 Golde Top, as they will probably tell you right off the bat that they do not have parts for a '60 Golde Top. What some of them might NOT know is that parts for most any Golde Top type roof on some other make of car is the same one that is used on the '60 Golde Top. Kevin, in England, (who has not been heard from for awhile) told me, as others have, that the parts for these sliding roof Golde Top types are all common parts and can usually be used on any car with a Golde Top type sliding roof.. So you might try some direct contact by email and/or phone. YellowRose......